If you want to change your IP address on your home computer, there are few ways that might work for you—some simple, some not.Before trying more complicated/technical methods described below, you can try something that's very easy.
If you want to change your IP address on your home computer, there are few ways that might work for you—some simple, some not.Before trying more complicated/technical methods described below, you can try something that's very easy.Tags: Layout For Research PaperSearch Engines For EssaysEssay Cover Page ExampleEssay By Dave BarryBusiness Plan Layout Free DownloadMilitary Pay For Overseas AssignmentsTo Kill A Mockingbird Thesis Statement About AtticusAudience Analysis Essay Example
The advantage here is that the process is a little bit more straight-forward, but the downside is that each device might have a different method for assigning a static IP.
Either method will work, so choose whichever option is more convenient.
In the Network and Sharing Center window, click on Change adapter settings on the left-hand side.
This will open the Network Connections window where you will see a list of all physical and virtual network devices. Now click on Internet Protocol Version 4 (TCP/IPv4) to select it and then click on Properties again.
If you're up for more-advanced methods, and you use Windows, try the steps below and see if your IP address changes.
- Computer connected directly to a cable or DSL modem If you are using a cable/DSL modem and a router, you may wish to connect your computer directly to the cable/DSL modem.In other instances, you need to change the IP address to match the subnet of another device so that you can connect and configure it.There are two ways to set a static IP address on a device.Also, you can easily assign static IP addresses to Windows, Mac, Linux machines or any other device easily.The disadvantage to this method is that it requires logging into your router, which isn’t the easiest thing to do for some non-techie folks.By default, most computers and devices on the network get their IP addresses via DHCP.DHCP is basically a system whereby a host, like a router or server, gives out IP addresses to devices so that they can communicate with the host and with each other over the network.The best way to avoid this conflict is to log into your router or whichever device is acting as the DHCP server and change the IP address distribution start address.If you start the address at something like .10 or .11, then you’ll have several IP addresses free that you can use to assign as static IPs.The first thing we want to do is to open the Network and Sharing Center.You can do that by clicking on the Start button and typing in network and sharing.